Tx-22 Installation Guide

Installation looks daunting, but it is fairly simple and straightforward. You only need a punch and some sandpaper.

Tx22 Install Video

Step-by-step guide on how to install Tx-22 ART.

Common issue fix

A common issue we see with the Tx22 after installation of the ART is being unable to pull the trigger. If this happens, first remove the slide from the upper. If you are unable to do that because you can’t depress the trigger, take your punch and remove the striker plate, and that will allow disassembly. Take your piece of sandpaper and give the top of the ART a couple of swipes, reattach your slide, and try again. Repeat this step until the trigger is able to be pulled. TAKE YOUR TIME. Try not to sand away too much material, as that can ruin the function.