Tx-22 Installation Guide
Installation looks daunting but is fairly simple and straight forward you only need a punch and some sand paper.
Tx22 Install Video
Step by step guide on how to install Tx-22 ART
Common issue fix
A common issue we see with the Tx22 after installation of the ART is being unable to pull the trigger. If this happens first remove the slide from the upper. If unable to do that because you cant depress the trigger take your punch and remove the striker plate and that will allow disassembly. take your piece of sand paper and give the top of the ART a couple of swipes, reattach your slide and try again. Repeat this step until the trigger is able to be pulled. TAKE YOUR TIME try not to sand away too much material as that can ruin the function.